With the continuous upgrading of the consumer population, after buying a house, the new generation of young people will find a house decoration company to decorate the house directly or directly buy a finely decorated house, which is the so-called finished house, and everything has been done. As long as you buy your own furniture or something, that’s why some traditional industries say they have been killed by these finely decorated houses. However, one of the most important problems is that we must pay attention to some things when inspecting and accepting houses, otherwise we will not know if we are cheated. So, what are the acceptance standards for ceramic tile construction? ? Let's find out together.
1. Ceramic tile construction acceptance standards
1. Leveling
Leveling is an important part of the ground decoration process, so we must negotiate with the decoration company before the decoration company whether to include leveling work. This may save a lot of costs.
2. Is the floor tile laying qualified?
During the inspection, you can take a small mallet and tap the ground gently. If there is a dull sound, it means that there will be no bulging in the inner core. If there is a crisp sound, That means there is an empty area inside, in which case bulging will easily occur.
3. Insufficient handling at the grassroots level
If the workers who make the base cut corners, it will cause the wall to be uneven. The situation is better, but the paint will produce color difference. The darker the color, the easier it is to detect; in the worst case, it will cause cracks or even big cracks. The area falls off.
4. Grooving on the wall and floor
We must pay special attention when making grooves. For the sake of decoration efficiency, many decoration workers will make the grooves rough, or make the grooves too deep or too shallow, which will affect the period of use, so when decorating It is necessary to supervise the work to see if the decoration workers' grooving operations are appropriate. Once a problem is discovered, stop the work immediately, and then replace it with an experienced decoration master to carry out the decoration. Otherwise, if problems occur later, it will be troublesome.
2. Ceramic tile entry acceptance standards
1. Look
①. Surface: Check whether there are any missing edges, fallen corners, or falling porcelain. In addition to the quality factors of the product itself, you should also pay attention to the protection of the finished product after the construction is completed;
②. Chamfering: The seam between two ceramic tiles at the sun corner should maintain a 45° chamfer, otherwise it will affect the overall appearance.
③. Aligning seams: The gaps between bricks should be even and flush. Too big or too small will not look good. Usually many masters will use toothpicks to control the spacing when paving.
④. Opening holes: There are relatively many pipelines in the kitchen and bathroom, and we often encounter the problem of opening holes in the ceramic tiles. Therefore, during the acceptance inspection, you can focus on checking whether the size of the hole is correct and whether the corners are smooth. .
⑤. Design and color: When applying tiles, focus on whether the joints between the patterns are natural and smooth, and whether there are any misalignments or uneven tiles.
2. Listen
Check for hollow tiles: Use a small hammer (or screwdriver, etc.) to hit the four corners and the middle of the tile, and listen to the sound it makes. Qualified tiles will have a dull sound, otherwise they will be hollow tiles, which will make it easier to lay in the future. If it falls off, if there is a hollow in the middle, or there are more than two hollows in the corners, it is best to take out the bricks and paste them again. Holes should be controlled at 5% of the total number, and the hollow area of a single piece should not exceed 10% (there must be no hollows in major parts).
3. Question
①Soaking time
Before laying the ceramic tiles, they must first be soaked in water. The soaking time depends on their density. When inspecting and accepting the ceramic tiles, you can ask the master how long they have been soaked. Generally, it is better if there are no blisters in the basin, about 2 hours is better.
②Loss situation
The loss of ceramic tiles is related to its own quality, workmanship, and room type. Generally, the normal loss rate is 5-10%. The larger the size, the more loss.
4. Cut
①Flatness
Place a 2M ruler in a horizontal position, then insert a feeler gauge into the raised area, and read the reading from the feeler gauge. Generally speaking, it should not exceed the acceptance standard of 2 mm, which is a normal phenomenon.
②Flowing water slope
ChefThere will be water on the bathroom floor, so there must be a certain slope when paving it. The tiles next to the floor drain need to be tightly adhered. During acceptance, you can do a pouring test to see if the water flow and drainage speed are smooth and unimpeded.
Zhongtaojun has introduced in detail the ceramic tile construction acceptance criteria and the tile entry acceptance criteria above. Therefore, if you want to buy a finished house, you may wish to read the above content carefully. , it will definitely be helpful to you. By the way, you can also check whether the decorator has cut corners or cut corners. Well, the above content is what Zhongtaojun has shared with you aboutthe acceptance standards for ceramic tile construction. Content, anyway, I hope this sharing can be helpful to you, here you go!
