When it comes to decoration, what is the most important thing? In addition to choosing ceramic tiles, the second step is laying ceramic tiles. Most people have seen decorators laying ceramic tiles, so Can you try laying tiles yourself? So today our topic sentence is to learn about the easiest way to lay tiles yourself!
1. Soak in water
If the tiles are laid directly without soaking in water, the tiles will absorb the moisture in the cement, resulting in gaps between the tiles and the cement, causing the tiles to fall off. So we should pay attention to this before laying tiles.
2. Pre-paving
Tiles are generally purchased according to the size of the space. Pre-laying work must be carried out before formal laying, because this can check the arrangement of the tiles and the size of the tiles required in different corners, so as not to cause unnecessary Waste will not lead to big mistakes in paving.
3. Paving
First, use ink lines or thin lines to mark the height of the ceramic tiles to ensure that there will be no height inconsistencies during the laying process.
The adhesive for laying ceramic tiles generally uses a cement mixture. Depending on the purpose of the ceramic tiles, the proportion of cement is different. The proportion of cement for wall tiles is 1:3, and for floor tiles is 1:2.
When laying ceramic tiles, pay attention to spreading the cement evenly. If you are laying wall tiles, you usually start from the door and window sides, and proceed from top to bottom, and from left to right.
4. Cleaning
After laying the tiles, the adhesive material on the surface of the tiles should be cleaned in time to avoid affecting the future aesthetic effect.
After reading the above steps of laying ceramic tiles, do you think that laying ceramic tiles is quite simple? If you also want to try to do it yourself, then just refer to the above steps!
